Low Finned Tube with Inner Grooves (Y-FIN/T-FIN+IG)
Acree provides more thermal solutions to optimise your enhanced heat transfer application.
- Copper | Copper Nickel | Carbon Steel | Stainless Steel | Titanium
- Condenser Tube and Evaporator Tube
- For High Performance and Efficiency
- For Seawater/ Increased Fouling Applications
- Weight Reduced Compare to Plain Tube
- Optimised inner to outer surface ratio
- Specification
- Materials and Properties
| ASTM B359 | Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes with Integral Fins |
| ASTM A179 | Seamless Cold Drawn Low Carbon Steel Heat Exchanger and Condenser Tubes |
| ASTM A334 | Seamless and Welded Carbon and Alloy-Steel Tubes for Low Temperature Sevice |
| ASTM A213 | Seamless Ferritic and Austenitic Alloy-Steel Boiler,Superheater,and Heat Exchanger Tubes. |
| ASTM A268 | Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service. |
| ASTM A249 | Welded Austenitic Steel Boiler,Superheater,Heat Exchanger,and Condenser Tubes |
| ASTM A789 | Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service. |
| ASTM B338 | Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchagners |
| Material Designations | Mechanical Properties | Physical Properties | ||||||||
| Europe | International | T.S（min） | Y.S（min） | Elongation（min) | Hardness (max) | Density | Thermal expansion coefficient | Thermal conductivity | ||
| En Symbol | Standard | UNS/Grade | Standard | Mpa | Mpa | % | HV | kg/dm³ | 10-6/K | W/MK |
| Copper and Copper Alloys | ||||||||||
| Cu-DHP | EN12452 | C12200 | ASTM B359 | 220 | 62 | 40 | min.40 | 8.94 | 17.7 | >310 |
| CuZn28Sn1 | C44300 | 320 | 103 | 55 | min.60 | 8.56 | 20 | 110 | ||
| CuZn20Al2 | C68700 | 340 | 124 | 55 | min.60 | 8.35 | 19 | 100 | ||
| CuNi10Fe1Mn | C70600 | 290 | 103 | 30 | min.70 | 8.92 | 17 | 45 | ||
| CuNi30Mn1Fe | C71500 | 370 | 124 | 35 | min.85 | 8.93 | 16 | 30 | ||
| Carbon Steel and Alloy | ||||||||||
| P235GH | EN10216-2 | ASTM A179 | 325 | 180 | 35 | 72HRB | 7.85 | 13 | 57 | |
| P255QL | EN10216-4 | Gr.1,6 | ASTM A334 | 415 | 240 | 35 | 90HB | 7.85 | 13 | 57 |
| 13CrMo4-5 | EN10216-2 | T11 | ASTM A213 | 415 | 220 | 30 | 89HRB | 7.85 | 18.5 | 42 |
| X12CrMo5 | EN10216-2 | T5 | ASTM A213 | 415 | 205 | 30 | 89HRB | 7.8 | 19 | 28 |
| Austenitic Stainless Steel Alloys | ||||||||||
| 1.4306 | EN10216-5 EN10217-7 |
TP304L | ASTM A213 ASTM A249 |
460~680 | 180 | 40 | 90HRB | 7.9 | 17 | 15 |
| 1.4404 | TP316L | 490~690 | 190 | 40 | 90HRB | 7.98 | 17.5 | 15 | ||
| 1.4541 | TP321 | 500~730 | 200 | 35 | 90HRB | 7.9 | 17 | 15 | ||
| 1.4571 | TP316Ti | 490~690 | 190 | 35 | 90HRB | 8 | 18 | 15 | ||
| Ferritic and Deplex Stainless Steel Alloys | ||||||||||
| 1.451 | EN10296-2 | TP439 | ASTM A268 | 415 | 205 | 20 | 90HRB | 7.75 | 10 | 21 |
| 1.4462 | EN10216-5 EN10217-7 |
S32205 | ASTM A789 | 665 | 485 | 25 | 290HBW | 7.8 | 15 | 15 |
| 1.4162 | EN10216-5 EN10217-7 |
S32101 | ASTM A789 | 700 | 530 | 30 | 30HRC | 7.8 | 15 | 15 |
| Titanium | ||||||||||
| 3.7035 | DIN17850 | GR.2 | ASTM B338 | 345 | 275~450 | 20 | 4.51 | 9.2 | 17 | |
Manufacturing Process
The fins of low finned tubes are obtained by roll forming the outer surface of a plain tube. Tube and fin consist of same piece.This process results in an increase in strength of the finned sections, whereas the plain ends and lands remain soft. Soft annealing of the tubes is required if they have to be suitable for bending or coiling
Fields of Application and Advantage
Chemical, Petrochemical and Petroleum Industries.Used in condensers,oil coolers,water heaters,heat exchangers,evaporators and heat-recoverers.Economical solution of heat exchanger problems of media with different heat conduction abilities or different current conditions.High chemical,thermal and mechanical resistance,suitable for rough working conditions
Related Products
Normally we offer sizes from OD 12.7mm to 25.4mm and wall thickness 1.2mm to 3.05mm
Fin pitch:11 fins/inch,Fin height 1.5mm
Fin pitch 19 fins/inch,Fin height 1.42mm,1.5mm
Fin pitch 26 fins/inch,Fin height 1.42mm,1.5mm
Fin pitch 28 fins/inch,Fin height 0.9mm,1.245mm
Fin pitch 30 fins/inch,Fin height 0.813mm,0.9mm
Fin pitch 36 fins/inch,Fin height 0.66mm
Fin pitch 40 fins/inch ,Fin height 0.9mm
Our low finned tube ASTM standards are given by B359 for copper and copper alloys, A1012 for austenitic, ferritic and duplex alloys) as well as B891 for titanium.
In case of stainless (austenitic, ferritic and duplex) and titanium tube materials tubes are available both in seamless and welded condition
Yes,our technical marketing experts are available at any time as contact partners to work together with your experts from the very early product planning stages in order to obtain optimum results for the manufacturing stage and for your application.